NSN: 5340-00-385-9269 / O-RING
- Product Description
- Questions (0)
Product Description
Manufacturer | Part Number |
---|---|
CONDOR INDUSTRIES, LLC DBA EMPIRE MANUFACTURING , 2T287 | 4026737 |
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV MILITARY ENGINES , 52661 | 4026737 |
UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS DIVISION DIV SPARES/SUPPORT EQUIPMENT , 77445 | 4026737 |
TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP , 11449 | 4026737 |
Name | Value |
---|---|
THREAD CLASS | 3A ROD CONNECTION |
THREAD DIRECTION | RIGHT-HAND ROD CONNECTION |
THREAD LENGTH | 1.135 INCHES MINIMUM ROD CONNECTION AND 1.165 INCHES MAXIMUM ROD CONNECTION |
SHANK LENGTH | 1.695 INCHES MINIMUM AND 1.705 INCHES MAXIMUM |
HOLE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
SHANK DIAMETER | 0.375 INCHES NOMINAL |
OVERALL HEIGHT | 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM |
OVERALL WIDTH | 0.768 INCHES MINIMUM AND 0.813 INCHES MAXIMUM |
END RADIUS | 0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
FORK SPAN WIDTH | 0.438 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
Additional Information:
Agency Usage | End Item Usage | Criticality |
---|---|---|
Air Force, Navy | SUBMARINE ACOUSTIC SONAR SYSTEMS | Critical |
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial
Cross Reference
4026737 11449TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP4026737 2T287FLORIDA EAGLE INDUSTRIES, INC4026737 77445UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS
Restrictions/Controls & Freight Information
Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:UPrecious metal type is unknown Criticality Code:FThe item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP).
Management
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.Materiel Management Aggregation CodeNZSX:PRATT & WHITNEY JET ENGINES & COMPONENTS, F-100???P-100Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each
Please note all orders are subject to our confirmation prior to shipping.