Additional Information

Site Information

 Loading... Please wait...

NSN: 5365-00-809-1356 / PLUG,MACHINE THREAD

$876.17
Part Number :
5365-00-809-1356
Condition:
New
Weight:
0.00 Ounces
Height:
Width:
Depth:
Availability:
In Stock
Ships The Next Business Day
Current Stock:
36

Purchase

Quantity:
Current Stock : 36

Share this product

  • Product Description
  • Questions (0)

Product Description

Approved Sources of Supply:
ManufacturerPart Number
TRIUMPH ACTUATION SYSTEMS - CONNECTICUT, LLC DIV TRIUMPH ACTUATION SYSTEMS-CT, LLC. , 33068283430-1
Technical Information:
NameValue
OVERALL LENGTH 0.290 INCHES NOMINAL
OVERALL WIDTH 0.290 INCHES NOMINAL
APERTURE DIAMETER 0.0635 INCHES MINIMUM AND 0.0640 INCHES MAXIMUM
OUTSIDE CORNER RADIUS 0.1717 INCHES NOMINAL
HARDNESS RATING 58.0 ROCKWELL C MINIMUM AND 63.0 ROCKWELL C MAXIMUM
CRITICALITY CODE JUSTIFICATION ABVL AND ADPW
SPECIAL FEATURES A RAISED AREA 0.100 IN. W AND 0.010 IN. H ON END RUNNING FROM CENTER TO ALL FOUR SIDES
MATERIAL STEEL COMP 440C
MATERIAL DOCUMENT AND CLASSIFICATION QQ-S763 FED SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR NON-CIRCULAR W/O BOLT HOLES

Additional Information:

Agency UsageEnd Item UsageCriticality
Navy FMS - BUILD FRIGATES CLASS SHIPS

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000

Cross Reference

283430-1 33068TRIUMPH ACTUATION SYSTEMS - CONNECTICUT, LLC

Restrictions/Controls & Freight Information

Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:UPrecious metal type is unknown Criticality Code:YThe item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.

Management

Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Materiel Management Aggregation CodeHSSX:AIRCRAFT HYDRAULIC SYSTEMS AND COMPONENTSPrice ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each

Please note all orders are subject to our confirmation prior to shipping.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Got a Question? Contact Us Today

Shipping Prices

Prices are calculated based on shipping address provided and weight of the product.

Click the button below to add the NSN: 5365-00-809-1356 / PLUG,MACHINE THREAD to your wish list.