Additional Information

Site Information

 Loading... Please wait...

NSN: 5365-01-048-6946 / SHIM

$163.72
Part Number :
5365-01-048-6946
Condition:
New
Weight:
0.00 Ounces
Height:
Width:
Depth:
Availability:
In Stock
Ships The Next Business Day
Current Stock:
87

Purchase

Quantity:
Current Stock : 87

Share this product

  • Product Description
  • Questions (0)

Product Description

Approved Sources of Supply:
ManufacturerPart Number
PARKER-HANNIFIN CORPORATION DBA FLUID SYSTEMS DIVISION , 3H8892489114-1
GOODRICH CORPORATION DIV POWER TRANSMISSION SYSTEMS , 995512489114-1
Technical Information:
NameValue
HOLE DIAMETER 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
BOLT CIRCLE DIAMETER 1.438 INCHES NOMINAL
APERTURE DIAMETER 0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
OUTSIDE CORNER RADIUS 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
BOLT HOLE QUANTITY 3
CONSTRUCTION ONE-PIECE
MATERIAL STEEL CORROSION RESISTING

Additional Information:

Agency UsageEnd Item UsageCriticality
Multi Agency HELICOPTER, IROQUOIS HH/UH-1 Critical Application

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Cross Reference

2489114-1 3H889PARKER-HANNIFIN CORPORATION DBA FLUID SYSTEMS DIVISION2489114-1 99551GOODRICH CORPORATION DIV POWER TRANSMISSION SYSTEMS

Restrictions/Controls & Freight Information

Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:UPrecious metal type is unknown Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Management

Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.The price has not been analyzed or reviewed for accuracy.ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.Materiel Management Aggregation CodeYQSX:"ENGINE ACCESSORIES, AIRCRAFT"Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDFDepartment of the Air ForceService OrganizationFU.S. Air ForceReparabilityNStock Fund (except Munitions)Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each

Please note all orders are subject to our confirmation prior to shipping.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Got a Question? Contact Us Today

Shipping Prices

Prices are calculated based on shipping address provided and weight of the product.

Click the button below to add the NSN: 5365-01-048-6946 / SHIM to your wish list.