Additional Information

Site Information

 Loading... Please wait...

NSN: 5365-01-113-9002 / SHIM

$93.96
Part Number :
5365-01-113-9002
Condition:
New
Weight:
0.00 Ounces
Height:
Width:
Depth:
Availability:
In Stock
Ships The Next Business Day
Current Stock:
31

Purchase

Quantity:
Current Stock : 31

Share this product

  • Product Description
  • Questions (0)

Product Description

Approved Sources of Supply:
ManufacturerPart Number
NAVAL SHIP SYSTEMS COMMAND , 800642585098
Technical Information:
NameValue
HOLE DIAMETER 0.812 INCHES NOMINAL
OVERALL LENGTH 3.876 INCHES NOMINAL
OVERALL WIDTH 2.750 INCHES NOMINAL
OUTSIDE CORNER RADIUS 0.688 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 2.500 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 0.688 INCHES NOMINAL
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE 1.375 INCHES NOMINAL
BOLT HOLE QUANTITY 2
MATERIAL ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5052
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/7,H32 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/8,H32 FED SPEC 2ND MATERIAL RESPONSE

Additional Information:

Agency UsageEnd Item UsageCriticality
Air Force MISSILE, AIR LAUNCH CRUISE (ALCM) AGM-86B Critical

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000

Cross Reference

2585098 80064NAVAL SHIP SYSTEMS COMMAND

Restrictions/Controls & Freight Information

Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Management

Stores Account Code1Marine Corps Stock Fund Account Item.Combat Essentiality Code2Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items.Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDMU.S. Marine CorpsService OrganizationMU.S. Marine CorpsReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each

Please note all orders are subject to our confirmation prior to shipping.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Got a Question? Contact Us Today

Shipping Prices

Prices are calculated based on shipping address provided and weight of the product.

Click the button below to add the NSN: 5365-01-113-9002 / SHIM to your wish list.