Additional Information:

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Cross Reference

7-113200151 02731MCDONNELL DOUGLAS HELICOPTER CO INC7-113200151 8V613BOEING COMPANY, THE DBA BOEING

Restrictions/Controls & Freight Information

Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)

Management

Materiel Category and Inventory ManagerT Industrial Supplies (DLA/GSA Items)Appropriation and Budget Activity2 Stock Fund Secondary ItemsManagement Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.Specific Group/Generic CodeB Rotary Wing AircraftWeapons Systems/End Item or Homogeneous GroupBJAH-64 AirframeAccounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.Source of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDADepartment of the ArmyService OrganizationAU.S. ArmyReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each

Please note all orders are subject to our confirmation prior to shipping.