- Product Description
- Questions (0)
|SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC. DBA SDDTI , 16712||A-5775|
|SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC. DBA SDDTI , 16712||F-7829PC35|
|SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC. DBA SDDTI , 16712||F6856 PIECE 45|
|SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC. DBA SDDTI , 16712||M201A|
|HOLE DIAMETER||0.1870 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM|
|BOLT CIRCLE DIAMETER||3.187 INCHES NOMINAL|
|OUTSIDE DIAMETER||3.625 INCHES NOMINAL|
|APERTURE DIAMETER||2.500 INCHES MINIMUM AND 2.502 INCHES MAXIMUM|
|BOLT HOLE QUANTITY||2|
|SPECIAL FEATURES||HOLES COUNTERBORED,0.250 IN. DIA. ON OPPOSITE SIDES,2 SLOTS,0.625 IN. W,0.062 IN. DP,180M DEG APART LOCATED ON OPPOSITE SIDES|
|MATERIAL||STEEL COMP 1045|
|MATERIAL DOCUMENT AND CLASSIFICATION||ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE|
|Agency Usage||End Item Usage||Criticality|
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000
A-5775, 16712SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC.F-7829PC35 16712SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC.F6856 PIECE 45 16712SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC.M201A, 16712SIEMENS DEMAG DELAVAL TURBOMACHINERY, INC.
Restrictions/Controls & Freight Information
Shelf-Life Code:0Nondeteriorative Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. Controlled Inventory Item Code:UUNCLASSIFIED Precious Metals Indicator Code:AItem does not contain precious metal Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Cognizance Codes9BNavy-owned stocks of DLA materialNaval Inventory Control Point, MechanicsburgSource of SupplySMSDefense Logistics AgencyEnterprise Business SystemsAgencyDNDepartment of the NavyService OrganizationNU.S. NavyAcquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. Controlled Item CodeUUNCLASSIFIEDShelf Life Code0NondeteriorativePurchasingQTY UOM1 EA : Each
Please note all orders are subject to our confirmation prior to shipping.